TCT teeth with negative cutting angle in alternating trapezium-flat geometry.
For use on stationary machines. Sawing of thin walled aluminium tubes/profiles), copper (tubes/profiles) and other non-ferrous metals (like brass), acrylic glass (Plexiglas®) and plastics (tubes/profiles), HPL-boards (Trespa®, Resolpal®, etc.)
Pinholes "Combi 2" = 2/10/60 + 2/11/63 + 2/12/64
Item no. | d1 | Z | Zf | d6 | W | b | PG | pcs/PU | € / PU | ||
555.2140 | 350 | 108 | TF neg | 30 | 3,4 | 2,8 | Combi 2 | 1 | € 211,13 | ||
d1 350 Z 108 Zf TF neg d6 30 W 3,4 b 2,8 PG Combi 2 pcs/PU 1 | |||||||||||
555.2155 | 350 | 108 | TF neg | 32 | 3,4 | 2,8 | Combi 2 | 1 | € 211,13 | ||
d1 350 Z 108 Zf TF neg d6 32 W 3,4 b 2,8 PG Combi 2 pcs/PU 1 | |||||||||||
555.2165 | 350 | 108 | TF neg | 40 | 3,4 | 2,8 | 2/9/55 + 4/12/64 | 1 | € 211,13 | ||
d1 350 Z 108 Zf TF neg d6 40 W 3,4 b 2,8 PG 2/9/55 + 4/12/64 pcs/PU 1 | |||||||||||
555.2224 | 450 | 108 | TF neg | 30 | 4,0 | 3,2 | Combi 2 | 1 | € 284,00 | ||
d1 450 Z 108 Zf TF neg d6 30 W 4,0 b 3,2 PG Combi 2 pcs/PU 1 | |||||||||||
555.2225 | 450 | 108 | TF neg | 32 | 4,0 | 3,2 | Combi 2 | 1 | € 284,00 | ||
d1 450 Z 108 Zf TF neg d6 32 W 4,0 b 3,2 PG Combi 2 pcs/PU 1 |
Galileïlaan 32
6716 BP Ede
Netherlands
+31 88 574 15 00
info@rotec.tools